Product Showcase

  1. Magnetic Square and V-Block
    9/14/2002
    Application:

    Most suitable as a holding fixture for measuring and marking operations.

    Features:

    • Attraction is available on the upper face, both side faces and V-faces.

    • Capable of measuring high precision without damaging the work piece.

    • Precision ground.

    • V-face is provided at 2 sections each at right angles for easy application.

  2. Standard Type Demagnetizer
    9/14/2002
    Features:

    • Suitable for long time use. Can be operated continuously for 24 hours.

    • Double coil design avoids heat build-up.

  3. Precision Punch Former
    9/14/2002
    EPF-80D punch former is an attachment for precision grinding different kinds of punches and electrodes of EDM in a surface grinding machine or an universal tool machine. The punch former with crank is for dressing grinding wheel into various cross sections of flat or curved shapes. EPF-80S punch former not only has the same features as EPF-80D but also has a center hole to allow long pin or punch use. Optional side to side feature for grinding wheel angular dresser.

  4. Optical Radius & Angle Dresser
    9/14/2002
    A universal tool grinder for dressing grinding wheel into various cross sections of flat or curved shapes. By “sighting” the diamond point through the lens, radius and angles can easily be made perfectly tangent–visually with the diamond. Also the radius can be blended together with incredible accuracy. The fine precision-made unit dresses grinding.
  5. Punch Grinder
    9/14/2002
    Features: • Punch grinder is a tool which can be put on the surface grinding machine for round punches .118 – 1 . Punches can be ground by putting the work piece in the rollers of punch grinder, without checking the center.

    • Accuracy of roller within .0002 while turning right or left. It can grind punches with outside diameter from .060 – 1.

  6. Radius and Angle Dresser
    9/14/2002
    Features:

    • Positive positioning of the diamond with setting gauge on dual purpose, reversible diamond holder, included with the dresser.

    • Simple, fast, accurate radius setting by measuring over the twin pins with micrometer, or by inserting gauge blocks. Inside or outside radius is determined simply by moving the sliding pin to the right for concave and to the left for convex radius.

    • 2 X 90° graduation for a combined 180° reading.

    • One push-pull type knob for radius and angle control and for safer and faster operations.

    • Accuracy. Extremely close tolerances are held in the manufacturing of this tool, assured by hardening and precision grinding of all critical parts.

    • Economy. Set-up and dressing time reduced to a bare minimum due to simplicity.

  7. Chuck Controllers
    9/14/2002
    ERD-505 Features:

    • Suitable for standard type of electromagnetic chucks.

    • Current capacity of 5A.

    • Demagnetizing time is 6-15 seconds.

    • Precisely adjust the magnetic force of electromagnetic chucks.

    • Works with any kind of electromagnetic chucks.

    ERD-510 ERD-515 Features:

    • Suitable for standard type of magnetic chucks.

    • Current capacity of 10A (ERD-510) and 15A(ERD-515).

    • Demagnetizing time is 6-15 seconds.

    • Precisely adjust the magnetic force of electromagnetic chucks.

    • Works with any kind of electromagnetic chucks.

    ERD-520 Features:

    • Works with super powerful electromagnetic chucks.

    • Can operate two chucks at the same time.

    • Current capacity of 20A.

    • Demagnetizing time is 8-15 seconds.

    • Precisely adjust the magnetic force of electromagnetic chucks.

    • Works with any kind of electromagnetic chucks.

    • Internal fan to keep unit cool.

  8. Magnetic Sine Chucks
    9/14/2002
    Micro Pitch Pole Magnetic Sine Chucks(economy type)

    Features:

    • Positive locking device is mounted on the base.

    • Precise angle is obtained with gauge block.

    • Constructed of hardened alloy tool steel.

    • Works for thin parts.

    Double Micro Pitch Pole Magnetic Sine Chucks (compound economy type)

    Features:

    • Positive locking device is mounted on the base.

    • Precise angle is obtained with gauge block.

    • Constructed of hardened alloy tool steel.

    • Works for thin parts.

    • Double way sine can grind two angles at the same time.

    Micro Pitch Pole Magnetic Sine Chucks

    Features:

    • Positive locking device for high precision. (Will not distort precision)

    • Precise angle setting is obtained with gauge block.

    • Constructed of hardened alloy tool steel.

    • Special feature with micropitch magnetic chuck, can fix tiny parts firmly on the chuck.

    • Ultra precision sine chucks.

    Double Magnetic Sine Chucks (compound)

    Features:

    • Positive locking device for high precision. (Will not distort precision)

    • Precise angle setting is obtained with gauge block.

    • Constructed of hardened alloy tool steel.

    • Special feature with micropitch magnetic chuck, can fix small, thin parts firmly on the chuck.

    • Ultra precision sine chucks.

    • Double way sine plate, can grind two angles at the same time.

  9. Electromagnetic Chucks
    9/14/2002
    Standard Pole Electromagnetic Chucks

    Application: Grinding.

    Features:

    • Hard-soldered top plates & solid bottom plates assure rigidity, precision, and durability.

    • Unique construction method reduces the weight of the face plate.

    • Brass-welded face plate absolutely free from gaps.

    • High acidity proof.

    • Consistent temperature within 59°F and an accuracy change ±0.000079 after continuous operation for more than 3 hours.

    Fine Pole Electromagnetic Chucks

    Application: Grinding thin work pieces.

    Features:

    • Brass welded faceplate absolutely free from gaps.

    • Brass welding protects the faceplate from coolant corrosion.

    • More than 1000M? of insulation resistance maintains precision.

    Super Power Pole Electromagnetic Chucks

    Application: Heavy cutting with milling machine, shaper, planer, etc.

    Features:

    • Specially designed for heavy cutting. The gap between the magnetic poles is enlarged and the magnetic force is super powerful.

    • Excellent for work pieces of 0.59 or thicker.

  10. Permanent Magnetic Chucks
    9/14/2002
    Standard Pole

    Application: Suitable for heavy and light grinding. It can also be used in liquid for EDM applications.

    Features:

    • Maintains high precision work face.

    • Can be used for both thin & thick work pieces.

    • Brass welding protects faceplate from coolant corrosion.

    • Strong magnetic attraction: 150 lbs/inch sq.

    Micro-Pitch Pole

    Features:

    • Thin and light weight.

    • Ideal for small and thin work pieces.

    • Hexagonal wrench used for the ON/OFF handle.

    • Wider effective magnetic area than other chucks of similar type.

    Circular Micro-Pitch Pole

    Application: Suitable for grinding applications. Specifically designed for work pieces of different thickness.

    Features:

    • Thin and light weight.

    • Ideal for thin and small work pieces.

    • Hexagonal wrench is used for ON/OFF handle.

    Circular Standard Pole

    Application: Widely used on work pieces for turning on lathes and for grinding on internal cylindrical or rotary grinding machines. Can also be used on milling machines.

    Features:

    • Strong magnetic force.

    • This type of chuck is effective for work pieces of different thickness.

    • Specially designed for steady and high precision applications.