Product Showcase
-
Shrink-Fit Toolholders
9/6/2002
Techniks shrink-fit toolholders provide concentric clamping force of 10,000 lbs or more directly on the tool shank. This translates to a T.I.R. as low as 0.0” to 0.0002”.
Ideal for high speed or high torque machining applications.
Shrink-fit toolholders are balanced to 15,000 RPM at G2.5 for high speed performance. Balancing to higher speed is available upon request.
Choose from CAT40, 50, BT40, HSK63A, 100A, 63F, and ISO30 styles.
-
Milling Chucks
9/6/2002
Techniks milling chucks have 4-5 more times the gripping force as a normal ER or TG collet chuck due to the special design based on a conical screw.
At 35 to 50 ft/lbs of pressure on the nut the roller bearings collapse the ID of the chuck to squeeze the shank of the tool with enormous pressure.
Our milling chuck will guarantee accuracy of 0.0004", 4" in front of the chuck on a 1.25" diameter ID. Due to the special steel used the rigidity is maximized enabling great surface finish.
Available in CAT 40, 50, BT40 sizes. Milling collets and coolant tubes are also available.
-
Reducing Sleeves
9/6/2002
We offer a full range of sleeves in both inch and metric sizes. Take advantage of our precision sleeves for smaller ID’s or odd shank diameters
You can save money with sleeves instead of buying new chucks.
• Use sleeves instead of buying a new chuck.
• T.I.R. of only 0.00012"
• No loss of accuracy with Techniks sleeves.
• Sealed to 1,000 P.S.I.
-
HSK A Hydraulic Toolholders
9/6/2002
• High holding power
• Concentricity is 3 micron or less
• Consistent runout between tool changes
• Easy to use, just turn adjusting screw and put into machine. No fixtures needed.
A special oil groove improves clamping force on tools with grease, oil, or coolant residue.
Available in HSK A32, 40, 50, 68, and 100 sizes.
Take advantage of our precision sleeves for smaller ID’s or odd shank diameters T.I.R. is only .00012" Note the cost advantage when using sleeves.
-
RADAX CAT & HSK Hydraulic Toolholders
9/6/2002
• Easy to pre-set length - adjust the height of the tool by turning radial set screw.
• High holding power
• Concentricity is 3 micron or less
• Consistent runout between tool changes
• Special groove in ID holds tight on dirty and greasy tools
• No danger in collapsing wall of chuck without the tool in it.
-
ISO / HSK Hydraulic Chucks for CNC Routers
9/6/2002
These ISO and HSK hydraulic chucks are frequently used with diamond tools because their high rigidity and excellent T.I.R. reduces wear on expensive diamond tools.
They are easy to use. Just tighten the set screw and hydraulic force is applied to tighten the tool shank. A special oil groove improves clamping force on tools with grease, oil, or coolant residue.
Take advantage of our precision sleeves for smaller ID’s or odd shank diameters. T.I.R. is only .00012". Note the cost advantage when using sleeves.
-
CAT and BT Hydraulic Chucks
9/6/2002
Our hydraulic toolholders feature a rugged, leakproof design for superior rigidity and reliable performance. A special oil groove improves clamping force on tools with grease, oil, or coolant residue.
Features
Taper is ground to AT3 or better!
Standard balance is 15,000 RPM!
Custom balancing is available!
Operation
Use for ultra-precision drilling and reaming operations. This chuck offers excellent repeatability, surface finish and improved carbide tool life because of the high clamping force and a T.I.R. of only 0.0001". It is specially designed so the toolholder cannot be damaged if accidently clamped down when empty.
Available for CAT40 and 50 spindles
-
Height Gauge and Tightening Stand
9/6/2002
Save machine time and increase productivity by pre-setting tools offline.
Tighten and untighten the collet nut and pull stud and set the height of your tool all in one setup. Works for BT, CAT, ISO, HSK tool holders.
Height gauge can be ordered separately. A different fixture is used to secure holders with drive dog notches. Any 30 taper tool holder works with a 30 taper unit, just change the tightening device to accommodate each type of tool holder.
Accurate to .001" for height gauge.
-
Tool Pre-Setter with Optical Display
9/6/2002
CNC machining centers are made for cutting chips - not measuring tools. Save valuable machine time by presetting tools offline.
The BWT Compact is a practical and functional pre-setter. It excels at quick and precise measurement of tools. It features handwheels in both axes to make speedy adjustments a snap.
Valuable time is saved by choosing modes according to technical specifications and using the 2D Tester. Hand wheels allow fast adjustment and fine tuning of both of X and Z axes.
Invest in a Techniks presetter to reduce set-up time, protect your tools, and increase your productivity.
-
Tool Pre-Setter with Digital Readout
9/6/2002
CNC machining centers are made for cutting chips - not measuring tools. Save valuable machine time by presetting tools offline.
The BWT Compact is a practical and functional pre-setter. It excels at quick and precise measurement of tools. It features handwheels in both axes to make speedy adjustments a snap.
Valuable time is saved by choosing modes according to technical specifications and using the 2D Tester. Hand wheels allow fast adjustment and fine tuning of both of X and Z axes.
Invest in a Techniks presetter to reduce set-up time, protect your tools, and increase your productivity.