Portable Hardness Tester PHT-1300

The Phase II hardness tester, model # PHT-1300 is an advanced integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

The PHT-1300 hardness tester combines the universal inpact device D and a data processor in a single unit. It automatically computes all vickers, brinell, rockwell, and shore hardness values. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of model # PHT-1300 is defined as "the quotient of the impact body's rebound velocity over its impact velocity" When the tester is connected to its optional printer, it can perform real time or batch printing. Other optional accessories include various support rings to meet the requirements of specialized applications.

                                                                                               

Specifications:

Dimensions	6.1 x 2.1 x 0.9in (150 x 22 x 53mm)
Impact Device	D
Impact Energy	8 ft-lbs (11mm)
Test Tip	TUNGSTEN CARBIDE
Measuring Accuracy	+-0.8% (Corresponding to +- 1 HRC AY HRC=58)
Max. Hardness of Sample	980HV
Weight	0.4lb (130g)
Operating Time	8 Hours Continuous /Rechargeable
Impact Direction	Any Angle
Operating Temperature	32 to 122 Degrees F (0 to 50 Degrees C
Min. Weight of Sample	11lbs/5kg (Less than 5kg To 0.1kg Coupled on solid support)
Min. Thickness of Sample	0.2in (5mm) (Coupled: 3mm)
Min. Thickness of Layers	0.8mm
Min. Radius of Curved Surface	1.2in (30mm) (With Support Rings: 11mm)
Coupling paste is available for testing thin or small parts weighing less than 2kg

Phase II Machine & Tool, 283 Veterans Boulevard, Carlstadt, NJ 07072. Tel: 800-526-9087; Fax: 201-933-3801.