Portable Coating Thickness Gage PTG-2200/2300
The PTG-2200/PTG-2300 automatically displays statistical data such as minimum, maximum, and mean values, and the standard deviation. When the guage is connected to its optional printer (model MP-2100), it can perform real time or batch printing.
PTG-2200
The Phase II brand PTG-2200 is an integrated portable coating thickness tester that combines the ferrous F-probe and a data processor n a robust single unit. It automatically computes the thickness of non-magnetic coatings (such as paint, plastic, galvanized layers) on a ferrous substrate by utilizing the properties of magnetic induction. Both continuous and single measurement modes are available.
PTG-2300
The Phase II brand PTG-2300 is an integrated portable coating thickness tester that combines the non-ferrous N-probe and a data processor in a robust single unit. It automatically computes the thickness on insulating coatings (such as paint, plastic) on a non-ferrous substrate by utilizing the properties of eddy current. Both continuos and single measurement modes are available.
The PTG-2200/PTG-2300 are charecterized by its very compact size, high accuracy, wide measuring range and simplicity of operation.
The PTG-2200/PTG-2300 automatically displays statistical data such as minimum, maximum and mean values, and the standard deviation. When the gauge is connected to its optional printer (model MP-2100), it can perform real time or batch printing.
|
Technical Specifications: PTG-2200
PTG-2300
|
|
|
Principle
|
PTG-2200 - magnetic induction
PTG-2300 - eddy current |
|
Measuring range
|
0-1250 microns
|
|
Resolution
|
1 micron
|
|
Accuracy (H = nominal value)
Zero-point calibration Two point calibration |
.
+- (3%H+1 um) micron +- (1%-3%H+1 um) micron |
|
Sample:
Min. radius work-piece Min. Measuring area Min. sample thickness |
.
Convex 1.5 / concave 9mm 0.3 in (7mm diameter) 0.01 in (o.5mm) |
|
Operating Temperature
|
32 - 104 degrees F (0-45 degrees C)
|
|
Power Supply
|
NiMH 2x3.6v
|
|
Dimensions
|
5.9 x 2.2 x 0.9 (150 x 53 x 22mm)
|
|
Weight
|
0.3 lbs (120g)
|
| Operating Humidity | 20% - 70% |
|
-one or two points calibration
-statistics: average (mean), maximum (max), minimum (min), number of measurements (no), standard deviation (s.dev). -real time printing or batch printing on model #TA-210 -continuous measurement (continue) and single measurement (single) -automatic switch off -The PTG2200/PTG2300 comes complets with a calibration set, charger and a protective case |
|
Phase II Machine & Tool, 283 Veterans Boulevard, Carlstadt, NJ 07072. Tel: 800-526-9087; Fax: 201-933-3801.