Product/Service

Milling Chucks

Source: Techniks, Inc.
Techniks milling chucks have 4-5 more times the gripping force as a normal ER or TG collet chuck due to the special design based on a conical screw.

At 35 to 50 ft/lbs of pressure on the nut the roller bearings collapse the ID of the chuck to squeeze the shank of the tool with enormous pressure.

Our milling chuck will guarantee accuracy of 0.0004", 4" in front of the chuck on a 1.25" diameter ID. Due to the special steel used the rigidity is maximized enabling great surface finish.

Available in CAT 40, 50, BT40 sizes. Milling collets and coolant tubes are also available.

Techniks milling chucks have 4-5 more times the gripping force as a normal ER or TG collet chuck due to the special design based on a conical screw.

At 35 to 50 ft/lbs of pressure on the nut the roller bearings collapse the ID of the chuck to squeeze the shank of the tool with enormous pressure.

Our milling chuck will guarantee accuracy of 0.0004", 4" in front of the chuck on a 1.25" diameter ID. Due to the special steel used the rigidity is maximized enabling great surface finish.

Available in CAT 40, 50, BT40 sizes. Milling collets and coolant tubes are also available.

Techniks products are available exclusively through its distributors and are backed by a 100% satisfaction guarantee. Ask your distributor for a Techniks catalog or call (800) 597-3921 to find the distributor near you. For more information visit Techniks on-line catalog at: www.techniksusa.com

TECHNIKS – Built For Speed.

Techniks provides CAT, BT, and HSK tool holders and accessories throughout North America..