Product/Service

Logic EMS

Source: Chicago Dial Indicator
Tailor made for measuring applications where absolute, incremental, and/or comparative measurements are required
Tailor made for measuring applications where absolute, incremental, and/or comparative measurements are required. Logic-EMS consists of a digital readout and a linear probe. CDI's Electronic measuring system is a versatile, practical and affordable measuring system which implements all of the features of the Logic-Plus series of gages. Practical applications for the Logic-EMS include machine and turning centers, QC rooms, and floor inspection stations. Featuring a large LCD readout and a wide selection of linear probes, this system is ideal for any stand-alone gaging application.
Logic-EMS standard features include:
...Remote Readout
    Readouts are available with base resolution of either: .00005"/.001mm or .0001"/.002mm.
...Linear Probes
    Probes, with accuracy of either .00005 or .001 are available. Measuring ranges include:
      .060"/1.5mm
      .150"/3.8mm
      .250"/6.35mm
      .600"/15mm
      1.0"/25.4mm
      2.0"/50.8mm
      4.0"/101.6mm
...LCD Display
    Large 5/8" high, backlighted, high visibility green digits.
...Power Sources
    Power sources available:
      110V 50/60 Hz
      220V 50/60 Hz
      Battery Operation or A/C Adapter (without backlight)
...Separate Probe and Display
    Probe and display can be separated up to 6 feet from each other for convenient viewing in hard to see areas.
...Logic-EMS OEM Versatility
    To further enhance the capabilities of this system, Logic-EMS can be adapted to your special applications, such as special measuring ratios, three units of measurement, and custom LCDs. The CDI staff will be glad to assist you with your special requirements.
...As Readout Only
    The standard Logic Series of self-contained gages, with the use of a special cable (P/N G03-0022) can also be used with the remote readout, provided the gage and remote are at the same base resolution. This is ideal where an extra large display is of benefit.
...Additional Uses
    The EMS remote can also be adapted for use with any device that outputs quadrature square waves and can operate on a 5VDC regulated power supply. These include micrometer heads, machine readout scales, etc. Contact Chicago Dial Indicator for further information.
...Other Important Logic-EMS features
    • Incremental measuring mode
    • Preset/Absolute measuring mode
    • T.I.R. measuring mode
    • Available in 10 resolutions
    • 7 measuring ranges of .060" to 4.0"
    • 3 SPC data output formats
    • User tolerance preset (high and low)
    • Inch/Metric display conversion
    • Measuring system of either English or Metric
    • Travel reverse
    • Maximum reading hold
    • Minimum reading hold
    • Auto off (battery operated only)
    • User selectable resolution
    • Floating zero or preset value
    • A/C 110V, 220V or battery power
    • ABD group 2 for up to .600" travel, AGD group 3 for 1.0" travel
    • Large direct drive LCD display
    • Low battery warning (battery operated only)
    • Internal and external serial numbers
    • Feature lock

Chicago Dial Indicator, 1372 Redeker Road, Des Plaines, IL 60016. Tel: 847-827-7186; Fax: 847-827-0478.