Logic Basic
Source: Chicago Dial Indicator
This model is designed to meet the basic measuring needs of a wide range of users and applications, while incorporating the advanced technology of the Logic electronic digital indicator line
This model is designed to meet the basic measuring needs of a wide range
of users and applications, while incorporating the advanced technology
of the Logic electronic digital indicator line. Standard features in the
Logic-Basic Series include:
![]()
...Incremental
measuring mode![]()
...7 measuring
ranges![]()
...Inch/Metric
display conversion![]()
...Travel reverse![]()
...Auto off![]()
...Floating
Zero![]()
...Rotating
bezel![]()
...Low battery
warning![]()
...Large direct
drive LCD display![]()
...Available
in 10 resolutions![]()
...User
selectable resolution![]()
...3 SPC data
output formats![]()
...Measuring
system of either English or Metric![]()
...Maximum reading
hold![]()
...3 power sources![]()
...AGD group
2 size for up to .600" travel![]()
...AGD group
3 size for up to 1.0" travel![]()
...Internal
and external serial numbers
...Incremental
measuring mode...7 measuring
ranges- .060" / 1.5mm
- .150" / 3.8mm
- .250" / 6.35mm
- .600" / 15mm
- 1.0" / 25.4mm
- 2.0" / 50.8mm
- 4.0" / 101.6mm
...Inch/Metric
display conversion- An English gage can be switched to Metric for Metric readings, and vice versa.
...Travel reverse- Reverses the direction of the reading (+/-) in relationship to spindle movement.
...Auto off- Turns gauge off after 10 minutes of inactivity. When Auto Off is enabled, an hour glass figure appears at the left side of the display.
...Floating
Zero- Allows the setting of ZERO at any position of the spindle.
...Rotating
bezel- Allows the user to position the gage display at any angle, throughout 270 degrees, for convenient viewing.
...Low battery
warning- The display flashes (short off / long on) as a warning.
...Large direct
drive LCD display- Character height .305".
...Available
in 10 resolutions- .00005" / .001mm
- .0001" / .002mm
- .00025" / .005mm
- .0005" / .01mm
- .001" / .02mm
...User
selectable resolution- Other gage resolutions can be selected by the user, provided the resolution is coarser than the resolution of the gauge originally purchased.
...3 SPC data
output formats- With the selection of the proper output cable, Logic measuring instruments have the following outputs:
- RS232: For direct interfacing to computers and serial printers
- BCD: CDI's established output system (enhanced)
- MTI: Interface directly to MTI data collectors and/or printers
- Remote Functions: Hold, Power input, and Clear are also provided at the Data I/O connection.
- *NOTE: Data output/input is automatically determined by the cable used.
...Measuring
system of either English or Metric- This minimizes measuring conversion errors, since you can choose either an inch or metric system.
...Maximum reading
hold- Displays and holds the highest reading. Actual spindle position is retained.
...3 power sources- Replaceable Zinc Air Batteries
- Environmentally safe (no cadium, lithium or mercury)
- A/C Adapter
- 110V or 220V 50/60 Hz. External
- Through the Data Port
- (Regulated 5VDC)
...AGD group
2 size for up to .600" travel- For measuring ranges .060" to .600"
...AGD group
3 size for up to 1.0" travel- For measuring ranges of 1.0"
...Internal
and external serial numbersChicago Dial Indicator, 1372 Redeker Road, Des Plaines, IL 60016. Tel: 847-827-7186; Fax: 847-827-0478.