Gage Stands
Brunswick's selection of comparator and height transfer stands are designed to provide the stability and durable accuracy needed for electronic gaging. All are suited for use with mechanical indicators as well.
All models have heavy cast iron bases with a hard, blue enamel finish, backlash free vertical fine adjustment and chrome plated posts.
MODEL 159F COMPARATOR STAND - The Model 159F Comparator Stand features measuring height capacity to 6", throat depth of 3-3/4" and 1/8" of vertical fine adjustment. The 3/8" diameter mounting bore allows cartridge style gage probes or AGD standard dial indicators to be easily interchanged. The anvil provided is a flat, ground and lapped disc measuring 3-5/8" in diameter. Weight is 15 lbs.
MODEL 159S COMPARATOR STAND - The Model 159S Comparator Stand is identical to the Model 159F described above except is supplied with a ground and lapped anvil having a serrated surface.
MODEL 158 COMPARATOR STAND - The Model 158 Comparator Stand is a larger, heavier unit for ultra-precise inspection work. It features measuring height capacity to 7", throat depth of 3-7/8" and 1/4" of vertical fine adjustment. The 3/8" diameter mounting bore allows cartridge style gage probes or AGD standard dial indicators to be easily interchanged. The supplied reversible anvil has both flat and serrated surfaces and measures 1-1/2" wide by 3" deep. Weight is 29 lbs.
MODEL 158D COMPARATOR STAND - The Model 158D Differential Comparator Stand incorporates all the features of the standard Model 158 except for a special purpose anvil design. The special anvil allows a second electronic cartridge probe to be mounted inside the anvil itself providing the means to contact a part from below as well as above for differential gaging. A dual input gage amplifier such as the Brunswick XL2000 Electronic Comparator may be used to achieve thickness, diameter and parallelism measurements with a higher degree of accuracy than a single input system can provide. The flat anvil surface measures 3" square.
MODEL 160 HEIGHT TRANSFER STAND - The Model 160 Height Transfer Stand is well suited to inspection work on surface plates using Brunswick's Model 224 Finger Probe or dial test indicators. It features a working height of up to 18", and a pivoted transfer arm that can be extended up toil" from the column. The arm can rotate 360 degrees on its pivot as well as 360 degrees around the column and has 1/8" of fine vertical adjustment. The stand rests on three hardened and lapped discs mounted to the base. Weight is 16 lbs.
Brunswick Instrument, Inc., 6150 West Mulford Street, Niles, IL 60714. Tel: 847-965-9191; Fax: 847-965-9193.